FEATURES			DOWNLOADS Catalog page Silver Bullet Seven Technical Specifications  MODELS Click here to view models.
100% water tested 150 psi (10,3 bar) rating Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure Reverse flow design for water conservation in the event of failure Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action Molded shock cone for smooth operation and reduction of water hammer Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions  Marine-grade S20P solenoid with stainless steel actuator High-strength glass-filled nylon body and cover with ¼" stainless steel cover bolts and mating brass body inserts Non-rising flow control stem throttles valve from full open to closed position on flow control models
MODELS
DOWNLOADS     Tech Specs - PDF Tech Specs - RTF/DOC   Part# Description  DWG DXF High Res JPG 12024E-10-H 1" FIP*  12024E Valve.dwg 12024E Valve.dxf   12024E-10.jpg 12024EF-10-H 1" FIP with flow control* 12024EF Valve.dwg  12024EF Valve.dxf  12024EF-10.jpg  12024EF-15-H 1-1/2" FIP with flow control*     12024EF-15-H.jpg  12024EF-20-H 2" FIP with flow control*      12024EF-20-H.jpg *International specify ISO  To download files, right-click and select "Save As..."
ELECTRICAL
Wiring requires a single lead from the controller to each solenoid, plus a common neutral to all solenoids; type UF wire, U.L. listed, is recommended for all hookups 24VAC/60Hz 24VAC/50Hz Inrush: 9.48 VA Inrush: 10.66 VA Holding: 5.11 VA Holding: 5.97 VA Do not use nominal voltage ratings listed above for sizing of valve wires.